Inoxpa C-TOP B
Operating principle
The control head contains up to a maximum of three solenoid valves, two magnetic targets and an electronic module formed by three sensors connected to the three visual indicators (LEDs). The solenoid valves which control and act on the valve are activated through external signals. At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head. The control head includes DIP switches that allow obtaining different configurations to adapt the control head to the different types of valves.
Design and features
The C-TOP B installs easily onto the top of the valve’s actuator. Quick and simple configuration. Line detection using magnetic Reed type sensors. Use of up to three solenoid valves possible. 360º vies of lights indicating valve status.
Materials
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
| Articlenr. | Description | Air connection | Brand | Bus system | Connection | Stock |
|---|---|---|---|---|---|---|
|
27833001IN
|
Inoxpa control unit
Type C-TOP B
Voltage 24V DC
No solenoid valve
|
Ø6mm
|
Inoxpa
|
Digital
|
Cable gland
|
|
|
27833002IN
|
Inoxpa control unit
Type C-TOP B
Voltage 24V DC
1 solenoid valve
|
Ø6mm
|
Inoxpa
|
Digital
|
Cable gland
|
|